TT Roadster L4-2.0L Turbo (BPY) (2008)
Power Seat Motor: Service and Repair
Seat Adjustment Motors
Seat Adjustment Motors
Removing
-
Remove sill side trim - 3 -. See: Service and Repair/Removal and Replacement/Front Power Seats/Sill Side Trim
-
Disconnect connectors - 6 - and - 7 -.
-
Remove seat and backrest adjustment actuators - 4 - and - 5 -. Refer to => [ Seat and Backrest Adjustment Actuator Assembly Overview ] See:
Service and Repair/Removal and Replacement/Front Power Seats.
-
Remove bolts - 1 - (quantity: 3).
-
Remove seat fore and aft, inclination, height and backrest adjustment switch - 2 -.
Installation
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
-
Route wires as close to couplings - 6 - and - 7 - as possible.
Tightening specification, refer to => [ Seat Adjustment Motors Assembly Overview ] See: Service and Repair/Removal and Replacement/Front
Power Seats