TT Roadster L4-2.0L Turbo (BPY) (2008)
Power Seat Switch: Service and Repair
Lumbar Support Adjustment Switches
Lumbar Support Adjustment Switches
Removing
-
Remove sill side trim - 1 -. See: Service and Repair/Removal and Replacement/Front Power Seats/Sill Side Trim
-
Disconnect the connector - 4 -.
-
Remove bolts - 2 - (quantity: 2).
-
Remove Driver Seat Lumbar Support Adjustment Switch (E176) - 3 - or Front Passenger's Seat Lumbar Support Adjustment Switch (E177) from
sill side trim - 1 -.
Installation
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
-
Route wires as close to the coupling - 4 - as possible.