TT Roadster L4-2.0L Turbo (BPY) (2008)
8 - Retaining spring
‹› Insert both ends into holes of brake caliper housing
9 - Sealing ring
‹› Do not damage when installing piston
‹› Removing and installing => [ Front Brake Caliper Piston ] See: Overhaul/Front Brake Caliper Piston.
10 - Pistons
‹› Removing and installing => [ Front Brake Caliper Piston ] See: Overhaul/Front Brake Caliper Piston.
‹› Apply thin coat of lithium grease (G 052 150 A2 ) to piston
11 - Protective cap
‹› Pull onto piston with outer sealing lip
‹› Do not damage when installing piston
‹› Removing and installing => [ Front Brake Caliper Piston ] See: Overhaul/Front Brake Caliper Piston.