TT Roadster L4-2.0L Turbo (BPY) (2008)
Brake Pad: Service and Repair
Rear Brake Pads
Rear Brake Pads
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1331)
Removing
-
Raise vehicle.
-
Remove wheels.
Do not loosen parking brake cable from brake caliper
-
Remove brake caliper housing while counter holding at guide pins.
-
Remove brake caliper housing from brake disc.
-
Hang brake caliper housing with wire so brake hose is not damaged by weight of brake caliper.
CAUTION!
Do not kink or bend brake lines and brake hose.
-
Remove brake pads and pad retaining springs from brake carrier - arrows -.
‹› When removing, mark brake pads that will be used again. Install in the same position, otherwise braking effect will be uneven!