TT Roadster L4-2.0L Turbo (BPY) (2008)
-
Remove upholstery bracket. Refer to=> [ Upholstery Bracket ] See: Body and Frame/Interior Moulding / Trim/Arm Rest/Service and
Repair/Center Armrest.
-
Engage parking brake as far as possible.
-
Pierce through seam on parking brake handle at place shown in illustration using a small screwdriver - 2 -.
-
Release clip underneath and remove parking brake handle trim - 1 - forward - arrow -.
Installation
Installation is reverse of removal, but note the following:
-
Make sure the parking brake handle trim engages audibly.
Left and Right Parking Brake Trim with Center Armrest
Removing
-
Remove rear center console. Refer to => [ Rear Center Console ] See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Center Console.
-
Remove parking brake handle trim. Refer to => [ Parking Brake Handle Trim with Center Armrest ].
-
Remove the bolts - 4 -.
-
Pry out cover cap - 1 - with a screwdriver and remove bolt.
-
Remove parking brake lever trim - 2 and 3 -.