TT Roadster L4-2.0L Turbo (BPY) (2008)
Cruise Control Switch: Service and Repair
Turn Signal Switch E2, Cruise Control Switch E45, Removing And Installing
Removing
-
Remove Steering Angle Sensor G85.
NOTE: To provide a better illustration, the following steps are shown with the steering column switch module removed.
-
Release retaining clips with 1.0 mm feeler gauge - item 1 - - arrows - and remove left lever switch.
Installing
Install in reverse order of removal, noting the following:
-
Make sure all fasteners and electrical connectors are properly engaged.