TT Roadster L4-2.0L Turbo (BPY) (2008)
Thermostat Housing: Service and Repair
Coolant Distribution Housing with MAP Controlled Engine Cooling Thermostat
Removing
^
Remove generator.
^
Disconnect coolant pipes.
^
Pull coolant hose - 2 - off from coolant distribution housing, thereby pull out retaining clip - 1 -.
^
Remove bolts - arrows - and remove coolant distribution housing with Map Controlled Engine Cooling Thermostat F265 from engine.
Installing
Installation is in reverse order of removal, note the following:
Note:
^
Always replace gaskets and seals.
^
Secure all hose connections using hose clamps appropriate for the model type.
^
Clean sealing surface for O-ring.
^
Replace O-ring and coat it with coolant.
^
Install generator.
^
Fill with coolant.