TT Roadster L4-2.0L Turbo (BPY) (2008)
-
Oil journal surfaces of camshafts.
‹› Cams - A - of cylinder 4 must face each other.
‹› The notches - arrows - on both camshafts must align.
‹› The side surfaces of notches must be exactly vertical.
-
Place camshafts together with drive chain in cylinder head and in chain tensioner.
-
Verify TDC position of camshafts again.
‹› Cams - A - of cylinder 4 must face each other.
‹› The notches - arrows - on both camshafts must align.
‹› The side surfaces of notches must be exactly perpendicular to cylinder head.
-
Oil journal surfaces of camshafts.
-
Apply an even, light sealant bead into clean groove of guide frame.