TT Roadster L4-2.0L Turbo (BPY) (2008)
/Page-509003.png)
-
Pull off camshaft sprocket using puller (T40001 ) and claw (T40001/6) and claw (T40001/7)
-
To guide seal puller, thread Adapter (2085/2) of seal puller (2085) into camshaft by hand up to stop.
-
Remove inner portion of seal puller (2085) two rotations (approx. 3 mm) from outer portion and secure with knurled-head screw.
-
Grease threaded head of seal puller (2085), position and screw into oil seal as far as possible with forceful pressure.
