TT Roadster L4-2.0L Turbo (BPY) (2008)
Front Engine Plate: Service and Repair
Front Sealing Flange Assembly Overview
Front Sealing Flange Assembly Overview
1
Bolt
‹› 90 Nm plus an additional 90° (1/4 turn)
‹› Replace
‹› Do not oil
‹› Fastening Counter Support (3415) => [ Crankshaft toothed belt sprocket, removing and
installing ] See: Timing Components/Timing Belt/Service and Repair/Toothed Belt Drive Assembly Overview
2
Crankshaft toothed belt sprocket
‹› There must be no oil on contact surface between toothed belt sprocket and crankshaft
‹› Only possible to install in one position
3
Bolt
‹› Tightening order => [ Tightening sequence of front sealing flange ]
4
Seal
‹› Replacing => [ Seal for Crankshaft, Ribbed Belt Side, Replacing ] See: Seals and Gaskets/Front Crankshaft Seal/Service and Repair.