TT Roadster L4-2.0L Turbo (BPY) (2008)
5
Bolt
‹› 15 Nm
6
Oil cooler
‹› See note => [ Oil Pump and Oil Pan ] See: Oil Pump/Service and Repair
‹› Ensure sufficient clearance to surrounding components
‹› Coolant hose connection diagram => [ Coolant Hose Connection Diagram ] See: Cooling System/Diagrams
‹› Removing and installing => [ Oil Cooler ] See: Oil Cooler/Service and Repair
7
Gasket
‹› Replace
8
Oil filter housing
‹› Removing and installing with Oil Filter Wrench ( 3417) or with socket AF 36, e.g. Socket AF 36 ( T10125)
‹› Draining => [ Oil Filter Housing, Draining ] See: Procedures
9
Locking bolt
10
Seal
‹› Replace
‹› Lightly lubricate
‹› Installed location => [ Sealing ring installation location ]
11
Oil filter element
‹› Observe change intervals => 810
12
Bolt
‹› 15 Nm
13
Oil baffle
‹› Installed location => [ Oil baffle installation location ]
14
Gasket
‹› Replace
15
Oil filter bracket
‹› Removing and installing => [ Oil Filter Bracket ] See: Oil Filter Bracket
Oil baffle installation location