TT Roadster L4-2.0L Turbo (BPY) (2008)
Oil Filter Housing: Removal and Replacement
Oil Filter Bracket
Oil Filter Bracket
Special tools, testers and auxiliary items required
‹› Drip tray for workshop crane (VAS 6208)
‹› Hose clamp pliers (V.A.G 1921)
‹› Locking Pin (T10060A)
Removing
CAUTION!
Cover cap of expansion tank with rag and open carefully, as hot steam or hot coolant may escape when opening.
-
Open cap of coolant expansion tank.
Removing
-
Disconnect electrical connector on Mass Air Flow (MAF) Sensor (G70) - 3 -.
-
Open clips - 1 and 2 - and remove air guide hose from mass air flow sensor.
-
Remove front air intake connector on lock carrier - 4 -
-
Remove engine cover.
-
Remove center noise insulation fasteners - 1 to 4 -.