TT Roadster L4-2.0L Turbo (BPY) (2008)
‹› Replace
19
Chain guard
20
Chain
21
Sealing flange, front
‹› Must sit on alignment pins
Removing and installing => [ Front Sealing Flange ] See: Cylinder Block Assembly/Front Engine Plate/Service and Repair/Front Sealing Flange
Oil pan tightening sequence
-
Proceed as follows:
-
Pre-tighten oil pan/cylinder block bolts - 1 to 20 - in a diagonal sequence to 5 Nm.
-
Tighten oil pan/transmission bolts - arrows - to 40 Nm.
-
Tighten oil pan/cylinder block bolts in a diagonal sequence to 15 Nm.