TT Roadster L4-2.0L Turbo (BPY) (2008)
^
Press sealing ring on as far as stop with Guide Sleeve T10071/3 and Screw T10071/4 from Assembly Tool T10071.
^
Install camshaft sprocket.
^
Note installation position: Thin rib of camshaft gear points outward - arrows - and TDC marking cylinder 1 is visible.
^
Install bolt for camshaft sprocket using retainer 3036.
Note:
^
By turning the camshaft, the valves could contact the stationary pistons at TDC. Therefore, the pistons must not be at TDC. Valves/pistons may be
damaged.
^
Install toothed belt.