TT Roadster L4-2.0L Turbo (BPY) (2008)
/Page-599003.png)
-
Lightly move knurled bolt back and forth, this causes the valve keepers to be pressed apart and captured in the installation cartridge.
-
Release pressure fork (VAS 5161/2).
-
Remove installation cartridge (VAS 5161/8).
-
Remove valve stem seals using Valve Seal Removal Tool (3364).
-
In the event valve stem seal driver (3364) cannot be used due to constrained spatial arrangements, drive out spring dowel sleeve - arrow - using a
drift and remove impact device.
-
Place lower part of valve seal removal tool ( 3364) onto valve stem seal.
-
Insert a drift - 1 - into bore in lower part of extractor device.
