TT Roadster L4-2.0L Turbo (BPY) (2008)
-
Place a lever at removal tool and pull out valve stem seal - arrow -.
Valve stem seals, installing
-
Place plastic sleeve - A - on valve stem to prevent damage to new valve stem oil seals - B -.
-
Oil sealing lip of valve stem oil seal - B -, insert into valve stem seal driver (3365) and carefully slide onto valve guide.
-
Remove plastic sleeve - A -.
-
Insert valve spring and valve spring retainer.
-
Install valve cotter disassembly and assembly device (VAS 5161) as shown.
Intake side