TT Roadster L4-2.0L Turbo (BPY) (2008)
/Page-599005.png)
Exhaust side
‹› If the valve keepers were removed from the installation cartridge, they must then be inserted into the insertion device (VAS 5161/18).
‹› Press the installation cartridge (VAS 5161/8) onto the insertion device from above and capture the valve keepers.
-
Press down installation cartridge (VAS 5161/8 ) with pressure fork (VAS 5161/2) and turn knurled screw of installation cartridge back and forth
while pulling it upward at same time.
-
Release pressure fork (VAS 5161/2) with knurled bolt pulled.
