TT Roadster L4-2.0L Turbo (BPY) (2008)
/Page-610014.png)
-
Release tension on toothed belt again.
-
Now tension toothed belt until notch and tab align.
-
Tighten mounting nut.
-
Turn crankshaft 2 revolutions further in direction of engine rotation until engine is positioned at TDC again. For this it is necessary that the last 45
° (1/8 rotation) is turned without interruption.
-
Check tension of toothed belt again. Specified value: Tab and notch align.
-
Check valve timing again.
