TT Roadster L4-2.0L Turbo (BPY) (2008)
‹› If pin does not fit into notch: Remove chain and place the chain on again.
-
Replace camshaft adjuster mounting bolt.
-
Tighten camshaft adjuster screw. To do so, use socket insert (T40080).
-
Remove drift (T10115) - arrow B -.
The rest of assembly is basically a reverse of disassembling.
-
Install cylinder head cover => [ Cylinder Head Cover ] See: Cylinder Head Assembly/Valve Cover/Service and Repair
-
Install high pressure pump => Fuel Injection and Ignition
24 Removal and Installation
-
Install vacuum pump => Brake System 47 Removal and Installation.