TT Roadster L4-2.0L Turbo (BPY) (2008)
-
Remove control motor - C -.
-
Disengage control motor lever - E - from connecting rod - D -.
-
Disconnect connector - A -.
Installing
‹› Lever - E - on control motor and connecting rod - D - are color-coded, they are colored black for Right Temperature Door Motor (V159).
Reinstall all removed components in the opposite sequence while observing the following:
-
Install the wiring harness so that it cannot come in contact with any moving parts (e.g. the actuating arm of the control motor).
-
Check Climatronic Control Module (J255) A/C control head DTC memory and erase any possible displayed malfunctions Vehicle Diagnosis,
Testing and Information System VAS 5051 under "Guided Fault Finding"
-
Perform a basic setting and output diagnostic test on the A/C and check the DTC memory one more time. Refer to Vehicle Diagnosis, Testing and
Information System VAS 5051 under "Guided Fault Finding".