TT Roadster L4-2.0L Turbo (BPY) (2008)
Discharge Air Temperature Sensor / Switch: Service and Repair
Evaporator Vent Temperature Sensor G263 , Removing and Installing
Evaporator Vent Temperature Sensor G263, Removing And Installing
NOTE: On vehicles with heating (without A/C system), there is no Evaporator Vent Temperature Sensor G263 installed (depending on version,
mounting opening in air distribution housing is not present or is sealed with sealing plugs).
-
Remove right center console trim.
Disconnect connector - A -.
Turn sensor - B - 90 degrees and pull it out of A/C unit.
Check seal - C - for proper seating when installing.