TT Roadster L4-2.0L Turbo (BPY) (2008)
-
Remove center high-mounted brake light - 1 - from rear lid - arrow -.
Installing
‹› Tightening specification, refer to=> [ Center High-Mounted Brake Light and License Plate Lights Assembly Overview ] See: Service and Repair.
Install in reverse order of removal, observing the following:
‹› Entire high-mounted brake light must be replaced in the event of faulty LEDs.
-
Press center high-mounted brake light into opening until retainers engage.
Audi TT and TTS:
-
Install lower rear lid trim.