TT Roadster L4-2.0L Turbo (BPY) (2008)
Glove Box Lamp: Service and Repair
Glove Compartment Lamp
Glove Compartment Lamp
Removing
-
Turn light switch into "0" position.
-
Press in catch - 1 - using a flat screwdriver and pry out glove compartment lamp - 2 -.
-
Disconnect electrical connector - 3 -.
‹› The glove compartment lamp LED cannot be replaced separately.
-
To replace the bulb, release the retaining clips - arrows - and remove the cover - 1 - over the bulb.
-
Remove the bulb - 1 - (12V, 5 W) from the socket - 2 - on the rear side of the glove compartment lamp.