TT Roadster L4-2.0L Turbo (BPY) (2008)
Headlamp Bulb: Service and Repair
Low Beam/Daytime Running Light Bulb, Replacing
Low Beam/daytime Running Light Bulb, Replacing
Removing
-
Remove headlamp.
-
Release spring clip - arrow - and remove low beam/daytime running light bulb housing cover - 1 - from headlamp housing.
-
Disconnect electrical connector - 3 - on low beam/daytime running light bulb.
-
Disengage wire clamp - 2 - and remove bulb - 1 - from housing.
Installing
Install in reverse order of removal, noting the following:
CAUTION:
-
Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that
evaporates on the bulb during operation can cause the glass to cloud over.
-
When installing cap, ensure proper seating. Water intrusion will damage headlamp.
-
Insert bulb in housing.
-
Secure bulb with spring clip.
-
Reconnect harness connector and close housing cover.
-
Secure housing cover using wire clamp.
-
Install headlamp.