TT Roadster L4-2.0L Turbo (BPY) (2008)
-
Note position of service flag on sealing ring (see -arrow-).
Note:
-
Observe waste disposal regulations!
-
Clean sealing surface on oil filter housing.
-
Lubricate rubber seal lightly with oil.
-
Smooth side of sealing ring must face toward outside
-
Screw on filter housing and tighten.
-
Install oil drain plug with new gasket.
-
Fill with engine oil.
Tightening Specifications
Oil filter .............................................................................................................................................................................................................. 25+5 Nm
Oil drain plug .......................................................................................................................................................................................................... 30 Nm