TT Roadster L4-2.0L Turbo (BPY) (2008)
-
Operate starter until tester shows no further pressure increase.
Compression pressure:
-
Install sparks plugs => 810.
-
Install ignition coils with power output stage =>
Fuel Injection and Ignition 28 Removal and Installation.
‹› By separating the connections, DTCs are stored to memory. After the test, check the fault memory and erase, if necessary.
-
Read out the DTC memory of engine control module (ECM). => Vehicle diagnostic, testing and information system VAS 5051 in the function
"Guided Fault Finding".