TT Roadster L4-2.0L Turbo (BPY) (2008)
Wheel Bearing: Removal and Replacement
Wheel Bearing Unit
Wheel Bearing Unit
Special tools, testers and auxiliary items required
‹› Angle Wrench (V.A.G 1756)
‹› Torque Wrench (V.A.G 1332)
Removing
-
Remove drive axle. Refer to => [ Drive Axle, Bolted Inner Joint ] See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Service and Repair/Removal and Replacement/Drive Axle, Bolted Inner Joint or => [ Drive Axle, Inserted Inner Joint ] See:
Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Removal and Replacement/Drive Axle,
Inserted Inner Joint.
-
Remove the brake caliper and secure it to the body using wire.
-
Remove the ABS speed sensor. See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems
-
Remove disc brake.
-
Remove bolts - arrows -.
-
Remove wheel bearing unit from wheel bearing housing.
CAUTION!
‹› Avoid contaminating with dirt and damaging the seal when setting down/storing.
The wheel bearing - 1 - must always face up.