TT Roadster L4-2.0L Turbo (BPY) (2008)
Fuse Block: Service and Repair
Fuse Panel in Engine Compartment E-Box
Fuse Panel in Engine Compartment E-Box
Removing
-
Remove relay and fuse panel, refer to => [ Relay and Fuse Panel in Engine Compartment E-Box ] See: Relay and Fuse Panel in Engine
Compartment E-Box.
-
Remove the fuses from the fuse panel.
-
Release retaining clips - arrows - and remove the cover from the fuse panel.
-
Pull off retaining strip - 1 - for harness connectors - arrow - and remove harness connectors from connector socket.
‹› The exact assignment of the fuse panel in the engine compartment E-box can be found in the applicable wiring diagram.
Installing
Install in reverse order of removal, observing the following:
-
Install relay and fuse panel, refer to => [ Relay and Fuse Panel in Engine Compartment E-Box ] See: Relay and Fuse Panel in Engine
Compartment E-Box.
-
Connect battery. Required actions=> See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery.