TT Roadster L4-2.0L Turbo (BPY) (2008)
Power Distribution Module: Service and Repair
Vehicle Electrical System Control Module, through 05.2008
Vehicle Electrical System Control Module, through 05.2008
Removing
-
If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or " Guided
Functions" Vehicle diagnosis, testing and information system VAS 5051.
-
Switch off ignition and remove ignition key.
-
Remove driver's storage compartment.
-
Remove the footwell air channel on the driver side.
-
Release retaining springs - arrows - and remove Vehicle Electrical System Control Module (J519) - item 1 - down from base mount - 2 -.
‹› Shown with connectors removed to provide a better illustration.
-
Press connector retaining strips - 1 and 2 - in - direction of arrow -.
-
Unplug connectors.
‹› Shown with connectors removed in illustration.
Installing
Install in reverse order of removal, observing the following: