TT Roadster L4-2.0L Turbo (BPY) (2008)
Fuel Level Sensor: Testing and Inspection
Fuel Level Sensor, Checking
Special tools, testers and auxiliary items required
-
Hand-held multimeter V.A.G 1526C
-
Connector test set V.A.G 1594C
Procedure
TT Coupe:
-
Remove rear seat bench.
TT Roadster:
-
Remove right rear panel side trim.
All Vehicles
-
Unclip retainers - arrows - of cover for sealing flange.
-
Disconnect electrical harness connector - arrow - at locking flange.
-
Connect multimeter between terminal - 2 - and - 3 - for resistance measurement.
Fuel Level Sensor G installed:
-
Sensor at lower stop: Approximately 270 ohms.
-
Sensor at upper stop: Approximately 70 ohms.