TT Roadster L4-2.0L Turbo (BPY) (2008)
-
Slowly turn intake camshaft with Toothed Belt Tensioner (T10020) in direction of - arrow A - until the camshaft adjuster fits onto the camshaft.
‹› If pin does not fit into notch: Remove chain and place the chain on again.
-
Replace camshaft adjuster mounting bolt.
-
Tighten camshaft adjuster screw. To do so, use socket insert (T40080).
-
Remove drift (T10115) - arrow B -.
The rest of assembly is basically a reverse of disassembling.