TT Roadster L4-2.0L Turbo (BPY) (2008)
/Page-1001002.png)
Specified value: 20 to 30 ohms (at approx. 20° C)
If the specification was not obtained:
-
Replace the Wastegate Bypass Regulator Valve ( N75).
If the specification was obtained:
Checking Voltage supply
-
Using a multimeter, check the Wastegate Bypass Regulator Valve (N75) electrical harness connector terminal 1 to Ground (GND).
-
Operate the starter briefly.
Specified value: battery voltage.
-
Switch the ignition off.
If the specification was not obtained:
-
Check the wiring for a short circuit to Battery positive (+) or an open circuit.
-
Check the electrical harness connector for damage, corrosion, loose or broken terminals.
-
If necessary, repair the wiring connection.
