TT Roadster L4-2.0L Turbo (BPY) (2008)
Variable Induction Position Sensor: Service and Repair
Intake Flap Motor and Intake Manifold Runner Position Sensor
For the installation location of the intake flap motor (V157). Refer to => [ Intake Manifold Assembly Overview ] See: Engine, Cooling and
Exhaust/Engine/Intake Manifold/Service and Repair/Intake Manifold Assembly Overview.
Special tools, testers and auxiliary items required
‹› Commercial 1 / 4 ratchet
‹› Torx 30
Removing
-
Remove engine cover.
-
Disconnect vacuum lines - arrows -.
-
Remove bracket - arrow - for the harness.
-
Disconnect connectors attached to the wiring harness and move the cable harness to the side as needed.
-
Remove bracket for cable connector - arrows - from coolant pipe.