TT Roadster L4-2.0L Turbo (BPY) (2008)
‹› Open the nut with the left - arrow - just enough so that the bracket can moved to the side.
-
Carefully pry off linkage from Intake Flap Motor (V157) - 4 -.
-
Remove Intake Flap Motor (V157) - 5 -.
‹› The illustration shows the intake manifold removed.
Installing
-
Installation is in reverse order.
‹› Tightening Specifications. Refer to => [ Intake Manifold Assembly Overview ] See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service
and Repair/Intake Manifold Assembly Overview.