TT Roadster L4-2.0L Turbo (BPY) (2008)
-
Loosen wiper arms from the wiper axle by tilting slightly.
-
Then, remove nuts completely and remove wiper arms from the wiper axles.
‹› If it is not possible to remove the windshield wiper arms this way, use the puller (T10369) or a commercially available puller.
-
Remove rubber seal - 1 - and remove plenum chamber cover - 2 -.
‹› The plenum chamber cover could be damaged.
‹› Coat the transition area between the windshield and plenum chamber cover - 2 - with soapy water and carefully pull the cover vertically up out of
the retainers on the windshield, beginning at the edge of the window.
-
Remove plenum chamber cover - 2 - by carefully pulling cover out of retainer on windshield.
-
Free up rear engine wiring harness on plenum chamber partition.
-
Open clips - arrows - and remove ECM.