TT Roadster L4-2.0L Turbo (BPY) (2008)
-
Remove screw - 1 -.
-
At Steering Column Electronic Systems Control Module J527, slide a 2.5 mm drill - item 2 - approx. 45 mm into the hole - arrow 1 -, releasing
the center retaining clip - arrow 2 -.
-
Pull Steering Column Electronic Systems Control Module J527 down slightly and remove drill.
-
Release retaining clip - arrow - on connector side of Steering Column Electronic Systems Control Module J527 and remove control module from
steering column switch module.
Installing
-
Tightening torque.
Install in reverse order of removal, noting the following:
-
Install steering column trim.
-
Install steering wheel.
-
Install airbag unit.