TT Roadster L4-2.0L Turbo (BPY) (2008)
Air Bag: Service and Repair
Left and Right Driver Knee Airbag Supports
Left and Right Driver Knee Airbag Supports
Removing
CAUTION!
‹› Observe safety precautions for work on airbags. Refer to => [ Airbag System General Safety Precautions ] See: Service Precautions.
-
Remove driver side knee airbag. Refer to => [ Driver Knee Airbag ].
-
Remove bolts - 1 - for right - 2 - and left - 3 - supports from mounting bracket/steering column - 4 -.
-
Then remove the supports - 1 - and - 2 - from the brace and mounting bracket/steering column - 4 -. Remove bolt - 3 -.
Installation
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
CAUTION!
‹› Observe safety precautions for work on airbags. Refer to => [ Airbag System General Safety Precautions ] See: Service Precautions.
‹› Before handling airbag units (e.g. disconnecting electrical connector), the person handling it must "discharge static electricity". This
can be done by touching door striker, for example.
-
Install driver side knee airbag. Refer to => [ Driver Knee Airbag ].