TT Roadster L4-2.0L Turbo (BPY) (2008)
/Page-2063004.png)
‹› The hard foam insert in the crease is not included in the service kit. Therefore, reuse the hard foam insert again in the seat crease.
-
Guide Seat Occupied Recognition Pressure Sensor ( G452) and Seat Occupied Recognition Control Module (J706) from above through seat pan
without disconnecting connectors.
CAUTION!
The pressure hose and the Seat Occupied Recognition Mat - 1 - must not be kinked under any circumstances during repairs.
-
Pull the crease between seat pan and Seat Occupied Recognition Mat - 1 - so that it is smooth (free of folds).
-
Secure the Seat Occupied Recognition Mat - 1 - with the clips - 2 - and - 3 - (quantity: 2).
-
Secure Seat Occupied Recognition Pressure Sensor (G452) - 4 -.
-
Tighten Seat Occupied Recognition Control Module (J706) with bolts - 2 - (quantity: 2).
-
Connect connector - 6 -.
-
Install cover with upholstery on seat pan. Refer to => [ Seat Pan Cover and Upholstery ] See: Body and Frame/Seats/Service and
