TT Roadster L4-2.0L Turbo (BPY) (2008)
-
Remove bolt - 3 -.
-
Remove three-point seat belt - 4 - from body mount.
-
Guide belt webbing - 5 - out of belt guide.
Installation
CAUTION!
‹› Follow safety precautions for working with pyrotechnic belt tensioners. Refer to => [ Pyrotechnic Belt Tensioners Safety Precautions ]
See: Seat Belt Tensioner/Service Precautions.
‹› Before handling belt tensioner units (e.g. disconnecting electrical connector), the person handling it must "discharge static electricity
". This can be done by touching door striker, for example.
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
-
Insert belt roller/belt tensioner/belt load limiter with anti-twist mechanism - 1 - in - direction of arrow - into mount - 2 - on body.