TT Roadster L4-2.0L Turbo (BPY) (2008)
Discharge Air Temperature Sensor / Switch: Service and Repair
Right Footwell Vent Temperature Sensor G262 , Removing and Installing
Right Footwell Vent Temperature Sensor G262, Removing And Installing
NOTE: On vehicles with heating (without A/C system), there is no Right Footwell Vent Temperature Sensor G262 installed (depending on version,
mounting opening in air guide channel is not present or is sealed with sealing plugs).
-
Remove glove box.
-
Disconnect connector - A -.
-
Turn sensor - B - 90 degrees and pull it out of A/C unit.
-
Check seal - C - for proper seating when installing.