TT Roadster L4-2.0L Turbo (BPY) (2008)
/Page-208002.png)
-
Before disconnecting electrical connectors on Fuel Level Sensor G, first release connector contact retaining tab.
-
Disengage electrical connectors - 1 to 3 - and disconnect them.
Installing
Installation is in reverse order of removal, note the following:
Version 1:
-
Insert fuel level sensor G into the guides on the fuel delivery unit and push up until it engages.
-
Connect electrical connections - 1 through 3 - and make sure they are securely engaged.
Version 2:
-
Connect electrical connections - 1 through 3 - and make sure they are securely engaged.
-
Insert fuel level sensor G into guides on the fuel delivery unit and push up until it engages.
Continuation for all versions:
-
Install fuel delivery unit, observing notes for connecting battery.
