TT Roadster L4-2.0L Turbo (BPY) (2008)
‹› When replacing lock cylinder, observe guidelines regarding immobilizer induction coil.
-
Disconnect electrical harness connector at induction coil.
Installing
Install in reverse order of removal, observing the following:
-
Place replacement key in lock cylinder and turn to ignition " on" position.
-
Insert the locking Pin (T40011) again all the way into the front side.
-
Slide lock cylinder - 1 - with induction coil into steering lock housing - 2 -.
-
Then remove locking Pin (T40011) and press lock cylinder securely in until catch engages audibly.
-
Connect electrical connector to immobilizer induction coil.