TT Roadster L4-2.0L Turbo (BPY) (2008)
Steering Column Lock: Service and Repair
Steering Lock Housing Adapter Wiring Harness, Removing and Installing
Steering Lock Housing Adapter Wiring Harness, Removing And Installing
Removing
-
Remove Steering Column Electronic Systems Control Module J527.
-
Disconnect electrical connector - 3 - at ignition switch.
-
Release retaining clips in - direction of arrow - and remove ignition key removal lock safety switch electrical connector - 2 -.
-
Remove steering lock housing adapter wiring harness - 1 -.
Installing
Install in reverse order of removal, noting the following:
-
Install Steering Column Electronic Systems Control Module J527.