TT Roadster L4-2.0L Turbo (BPY) (2008)
Steering Gear: Service and Repair
Electro-Mechanical Steering Gear
Electro-Mechanical Steering Gear
Special tools, testers and auxiliary items required
‹› Ball Joint Puller (3287 A)
‹› Torque Wrench (V.A.G 1331)
‹› Torque Wrench (V.A.G 1332)
‹› Engine/Transmission Jack (V.A.G 1383 A)
‹› Locating Pins (T10096)
Removing
‹› The steering gear is removed together with the subframe, stabilizer bar and transverse links.
CAUTION!
Before starting work on electrical equipment and removing steering wheel, the following conditions must be fulfilled:
‹› Disconnect the battery Ground (GND) cable.
‹› Wheels must be located in straight ahead position.
-
Set the wheels to the straight ahead position.
-
Disconnect the battery.
-
Remove the nuts - arrows - and the steering column universal joint cover.
-
Remove the bolt - 1 - and remove the universal joint - 2 - from the steering gear.