TT Roadster L4-2.0L Turbo (BPY) (2008)
Steering Gear: Service and Repair
Electro-Mechanical Steering Gear Assembly Overview
Electro-Mechanical Steering Gear Assembly Overview
1
Universal Joint
2
Bolt
‹› 20 Nm plus an additional 90° turn
‹› Always replace after removal
3
Electrical Wiring
4
Power-Assisted Steering Gear
‹› Removing and installing, refer to => [ Electro-Mechanical Steering Gear ] See: Electro-Mechanical Steering Gear
‹› When converting from Generation II steering gear to Generation II, the electrical wire - 3 - must also be replaced.
‹› With power steering control module (J500)
‹› Can be tested in "Guided Fault Finding" using the vehicle diagnosis, testing and information system (VAS 5051B )
5
Wheel Bearing Housing
6
Nut