TT Roadster L4-2.0L Turbo (BPY) (2008)
‹› If corrosion, damage, wear-out or first signs of contamination on steering rack can be seen, complete steering gear must be replaced.
‹› If no grease film is visible on steering rack, steering gear must also be replaced completely.
Installing
-
Coat bushing - arrow 1 - and splines of steering pinion - arrow 2 - with (G 052 192 A1).
While doing this, no grease must enter the sensor or its vicinity!
CAUTION!
Do not use other grease under any circumstances.
The new steering pinion with steering torque sensor (G269) has an anti-twist element - arrow -. This may only be removed after locking to sensor
wire.