TT Roadster L4-2.0L Turbo (BPY) (2008)
/Page-1767002.png)
-
Loosen spring clamp - 1 - using (V.A.G 1275 ) from boot and slide onto tie rod.
-
Remove clamp and pull off boot from steering gear housing.
-
Remove the tie rod from steering gear using (V.A.G 1923 ).
‹› If corrosion, damage, wear-out or first signs of contamination on steering rack can be seen, complete steering gear must be replaced.
‹› If no grease film is visible on steering rack, steering gear must also be replaced completely.
Installing tie rod
