TT Roadster L4-2.0L Turbo (BPY) (2008)
Rear Knuckle: Service and Repair
Wheel Bearing Housing, Removing and Installing
Wheel bearing housing, removing and installing
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G 1332
Removing
-
Measure dimension from center of wheel to lower edge of wheel housing.
-
Remove wheel.
-
Remove stone deflector from trailing arm.
-
Remove coil spring.
-
Remove brake caliper/brake carrier and suspend from body with wire.
-
Remove ABS speed sensor from wheel bearing housing.
-
Wheel bearing unit, removing
-
Remove cover plate.
-
Remove bolt -2- and washer -1-.
-
Remove bolt for tie rod -1-, upper transverse link -2- and lower transverse link -3- from wheel bearing housing -4-.
-
Remove connecting link -1- from trailing arm.