TT Roadster L4-2.0L Turbo (BPY) (2008)
Front Subframe Mount: Testing and Inspection
Subframe Mount Adjustment, Checking
Work procedure
-
Pull EVAP canister with connected lines upward in direction of - arrow - out of retainer and lay it aside.
Proceed as follows:
-
Check dimensions on right mount for engine and transmission:
‹› Both bolt heads - 2 - must be parallel to edge of engine mount support arm - 3 -.
‹› A distance of - x - = 16 mm must be present between engine mount - 1 - and engine support - 4 -.
‹› Distance - x - = 16 mm can also be checked with corresponding round stock.
-
If distance is too small or too large, subframe mount must be adjusted => [ Subframe Mount, Adjusting ] See: Adjustments.