TT Roadster L4-2.0L Turbo (BPY) (2008)
Tire Pressure Module: Service and Repair
Tire Pressure Monitoring Control Module 2
Tire Pressure Monitoring Control Module 2
Removing
The tire pressure monitoring control module 2 ( J793) is located under the instrument cluster.
Before removing control module, read out code using Guided Fault Finding in "Replace control module" function.
-
Remove instrument cluster. See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier
-
Remove bolts - arrows -
-
Remove tire pressure monitoring control module 2 (J793) - 2 - and disconnect connector - 1 -.
Installing
Installation is in reverse order of removal, with special attention to the following:
-
If tire pressure monitoring control module 2 ( J793) is replaced, system must be recoded.
-
Connect VAS 5051 and select "Guided Functions"
Then:
-
4C Tire pressure monitoring II J793
-
Replacing 4C control module (repair group 44)